[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference ssag::save_set_manager

Title:Save Set Manager
Moderator:SSAG::SUSSWEIN
Created:Tue Nov 15 1994
Last Modified:Wed May 28 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:72
Total number of notes:276

66.0. "Saveset-f-memalloc which params?" by ALFSS2::GRINNELL_M () Fri Jan 31 1997 14:38

    I have a customer who is using SSMGR V1.3 and VMS 6.2. He is using
    the commands saveset copy/all ta90:*.* tk85:*.*/nolog/full. The
    copy proceeds normally then aborts with the saveset-f-memalloc error.
    I found the error in the message appendix but it does not specifically
    outline what the params for a user account should be if this is what's
    causing the problem. The customers user account params are as follows
    
    wsquota 16384
    wsext 16384
    pgfl 65000
    bytlm 65536
    biolm 150
    astlm 8192
    diolm 4096
    
    When he attempted to read the savesets on the tk85 to see if anything
    had been copied he received a parity error. He will use another tape
    and retry the operation to eliminate a bad tape possibility. 
    
    Do you have any information regarding what params this error is
    referring to and are the recommended params for the user account
    performing saveset operations documented?
    
    Michael...
T.RTitleUserPersonal
Name		DateLines
66.1SSAG::TERZAMon Feb 03 1997 10:486
   I am looking into this.  I will report back as soon as I have anything.
   
   
   						Terza L. Z. Ekholm
66.2SSAG::TERZAWed Feb 05 1997 16:3612
   Michael,
   
   I was not able to reproduce this problem.  In researching the problem,
   however, I came across a reference that indicated changing the SYSGEN
   paramater, WSMAX to 43000 or greater.  Your customer may want to give
   this a try.
   
   Please let us know what happens.
   
   					Regards, Terza
66.3Saveset-f-memallocALFSS2::GRINNELL_MThu Feb 13 1997 15:2527
    Terza,
    
    I spoke with the customer. He increased his params to the following
    and still recevied the error. However, when he did a vms tape to
    tape copy he did not receive the errors:
    wsquo 43000
    wsext 43000
    pgflquot 65000
    bytlm 65536
    diolm 4096
    astlm 8192
    biolm 150
    enqlm 1500
    fillm 500
    
    sysgen
    ---
    channelcnt 511
    
    I have suggested that he next try to lower the fillm to 128 or raise
    the sysgen param channelcnt to 2047 and retry the operation. I have
    also sent him a command file that monitors the processes quotas to
    see if this sheds any light on the problem. Any other suggestestions
    would be appreciated.
    
    Thanks,
    Michael..
66.4Saveset-f-memallocALFSS2::GRINNELL_MTue Feb 18 1997 06:523
    After lowering the value of fillm, the saveset copy operation worked.
    
    Michael
66.5What Impact Does FILLM Have On SSMGR?CSC32::B_KNIGHTENTue May 27 1997 13:1311
    
    I had a customer who said his Saveset Copy was going
    extremely slow. However, upon decreasing FILLM to 128,
    it increased the speed of the copy operation.
    
    Since SSMGR is only opening 1 output file (saveset file),
    why would it care what FILLM is set to?
    
    Your response is appreciated.
    
    Barbara Knighten