|  |     It's not just the DHCP client.  If you set it manually, it can change,
    too.  It's a, uh, "feature".  I have not received a straight answer if
    this is an intended behavior.
    
    --Ron
 | 
|  |                                                             
    
    
    It is a known problem in Windows NT 4.
    Here is the Knowledge database article from Micorsoft. Might be W95 has
    the same "feature". I had the same problem with NT 3.51. 
    
    
    Windows NT Client: Primary/Secondary WINS Servers Switch
    
    Article ID: Q164309 
    Creation Date: 26-FEB-1997
    Revision Date: 07-APR-1997 
    
    The information in this article applies to: 
    
    Microsoft Windows NT Workstation version 4.0 Microsoft Windows NT
    Server version 4.0 
    
    
    
    
    
    SYMPTOMS 
    
    
    When a Windows NT 4.0 client has a primary and a secondary WINS server
    assigned, it may unnecessarily switch the secondary server to primary
    server. 
    
    
    
    CAUSE 
    
    
    Normally, a workstation should only move the secondary WINS server into
    the primary role if the primary WINS server fails to respond to
    repeated name registration or name query attempts. However, a problem
    with Netbt.sys causes some workstations to switch when doing normal
    name refreshes. 
    
    This switch can cause unnecessary WAN traffic if the WINS server
    defined as primary is a local computer, and the one defined as
    secondary is a remote computer or across a WAN link. 
    
    
    
    RESOLUTION 
    
    
    A new version of Netbt.sys has been created that no longer exhibits
    this problem. 
    
    
    
    STATUS 
    
    
    Microsoft has confirmed this to be a problem in Windows NT version 4.0.
    A supported fix is now available, but has not been fully
    regression-tested and should be applied only to systems experiencing
    this specific problem. Unless you are severely impacted by this
    specific problem, Microsoft recommends that you wait for the next
    Service Pack that contains this fix. Contact Microsoft Technical
    Support for more information. 
 |