| Hi Youda,
I will answer your questions below!
Hi there ,
I have two ( 2 ) questions that needs to be clarify :
1. Are there any instructions to install the BETA ver 5 for FH/PC under WIN 95
for NOVELL/NETWARE environment only ??
No Ip traffic, just IPX/SPX clients to communicate with Netware Servers. We
have setup the AP as a Workgroup Bridge with all defaults values ( V2.1 ) .
The
client is setup under WIN 95 with IPX/SPX as provided by WIN 95, with IP
address etc. When we try the Network Neighborhood, it tells us that this is
not
Accessible ( like we have not logged into the network ). We can ping the AP
from the Wired side , but not from the Laptop ( NEC Versa 2400 note-book ).
RL2setup works OK and Sync with the Master AP ( one only ).
Are we missing any thing ?? Is there a manual that explain the setup
procedures
??
>> It is no different setting this up for Wireless, therefor we have not
documented any procedure of this type. Do you have the network setup
for Netware Client?
2. One of our customers , QLD XRAY are very interested in implementing wireless
in a very intense Radiology environment, with equipment such as CAT Scanners,
Nuclear Devices etc.
Do we know of any issues as far as interference in these environments ??
>>> I have not heard of any problems nor do I believe this will be a
problem. What we recommend doing, is if the customer has a particular
area of concern, they should run a test before installing it.
Many Thanks in Advance.
Youda Kopel ,
NPB MELB.
>>> Regards,
Jeff
|
| Hi Jeff ,
Always helpfull ,
Many Thanks ,
Youda Kopel ,
NPB Melb.
[Posted by WWW Notes gateway]
|