| T.R | Title | User | Personal Name
 | Date | Lines | 
|---|
| 571.1 | It depends. | CHOVAX::YOUNG | Back from the Shadows Again, | Tue Oct 06 1987 12:07 | 10 | 
|  |     The answer is that it all depends.
    
    Normally I would say that 25% Interrupt time is excessive.  However
    it depends on what type of VAX, is it in a cluster(what kind), what
    special hardware exists, how is the system being used, and what
    are the other CPU numbers like.  If you can answer these questions
    then I (or someone else) could probably give you a more specific
    answer.
    
    --  Barry
 | 
| 571.2 | SPM's PCsampler | ATPS::MALLORY | SPM V3.2 or bust... | Tue Oct 06 1987 18:58 | 7 | 
|  |     Try using our PCsampler. It can tell you by module in the
    exec where u're spendin your interrupt stack time.
    
    Kevin
    VAX SPM Development
    (Kit available on HITECH::SYS$PUBLIC:SPM031_SDC.A,.B )
    
 | 
| 571.3 |  | PSW::WINALSKI | Paul S. Winalski | Fri Oct 09 1987 13:35 | 13 | 
|  | An idle VMS system should spend next to zero time on the interrupt stack.
The only interrupt stack activity on an idle system is the timer going off
every 20ms (or whatever the quantum interval is).  If you are spending 25%
on the I-stack, your system is not idle.  Possible explanations:
- your system is part of a VAXcluster that is doing things behind your back
- your system is on an ethernet and has service enabled, and there are things
  elsewhere on the ethernet trying to boot
- your system is a level 1 or level 2 DECnet router
--PSW
 | 
| 571.4 | Oops, I missed the "idle system" comment. | CHOVAX::YOUNG | Back from the Shadows Again, | Fri Oct 09 1987 15:39 | 1 | 
|  |     
 | 
| 571.5 |  | NEWVAX::CRITZ | In one damn minute, Captain | Fri Oct 09 1987 16:18 | 3 | 
|  |     Addendum to the list .3
    
    -  You're running VAX PSI (at least one of the older versions).
 | 
| 571.6 |  | MONSTR::FRAZIER | James Frazier VMS/VAXclusters-CSSE | Mon Oct 12 1987 09:08 | 6 | 
|  | 
	Do you have any comm gear?  Like DHs, DZs ?
	If a comm line is 'bad' or hooked to a 'bad' modem, the
	can spend a lot of time handeling the spurious interrupts.
 |