| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1214.1 | depcm and nt4.0 should work | NETCAD::FERGUSON | | Thu Dec 05 1996 13:53 | 7 |
| 1214.2 | DEPCM - New NT4 Drivers not working ! | OTOU01::MAIN | Systems Integration-Canada,621-5078 | Sun Dec 22 1996 08:34 | 23 |
| 1214.3 | More Info ... | OTOU01::MAIN | Systems Integration-Canada,621-5078 | Sun Dec 22 1996 08:47 | 6 |
| 1214.4 | | kalvin.dechub.lkg.dec.com::FERGUSON | | Thu Dec 26 1996 14:51 | 5 |
| 1214.5 | Another incident | ODIXIE::GARABO | CyberNeuroSurgeon | Wed Jan 01 1997 20:36 | 6 |
| 1214.6 | confirm: not working | NETRIX::"[email protected]" | | Thu Jan 02 1997 10:46 | 13 |
| 1214.7 | DEPCM H/W Rev.B & C with V4.0 kit supports WNT4.0 | NETCAD::KWONG | | Fri Feb 07 1997 17:31 | 16 |
|
Hi,
Rev.A hardware (can be identified by the prodcut label on the back
of the DEPCM card....FCC ID: HEDEN2212) was produced before WNT4.0
release. It requires the card vendor ID to be reblasted. I have the
blast utility. BUT, we have made a decision not to release it due to the
danger of making the card unusable if task performed incorrectly.
(send me mail if you want to try blast util.)
Rev.B & Rev.C hardware supports WNT4.0 with S/W release V4.0 !!
My reommendation is don't update to WNT4.0 or upgrade the hardware to
B or C rev. (shown below the Ethernet Address of the product label)
rgds;
=Joe=
|
| 1214.8 | depcm rev c and nt 40 : working !!! | NETRIX::"[email protected]" | | Tue Feb 25 1997 04:13 | 8 |
| hi
I am happy: got the DEPCM REV:C running on NT40 sp2 and driver kit rev 40
(hinote vp535, int 11, d000, 300 the defaults)
thanks to joe and the poeple replying to this note
cheers
[Posted by WWW Notes gateway]
|
| 1214.9 | DEPCM-BA rev ?? +NT4.0(BUILD1381) | PGREEN::MURDOCHP | | Thu Mar 20 1997 07:22 | 21 |
| Help,
I am using a DEPCM-BA (HEDEN2212-2) is this of sufficient rev ?
I am also using NT4.0 using no services PACKS. Build (1381)
We have 5 people wanting to use their HINOTES CS450 for NT4 demos etc.
Help urgently required. I have been to support they pointed me to
The 3.51 drivers in PCIT400.zip. It stil doesnt work and I have tried
the
Work around with a NE200 info file change???,
Please help urgently
Cheers PEter Murdoch
PS please reply to PGREEN::MURDOCHP as well.
|
| 1214.10 | BLAST from the Past | PGREEN::MURDOCHP | | Wed Mar 26 1997 05:31 | 19 |
| Hi,
can anyone point me in the right direction for the BLAST software to
make my DEPCM-BA become a REV-C. All other avenues of replacement
are fruitless. Which is a shame since the product is advertised as
having a 5 year warranty. I can;t get mine replaced/upgraded without
it costing me money. I buy a new one.
This will solve my problem and 20 other peoples future problems
as we all have Hinotes with DEPCM-BA in them which were echanged
by digital to fix their old Cards(IBM lookalikes).
please can someone reply with some good news.
Also please notify me on PGREEN::MURDOCHP
|
| 1214.11 | DEPCM Rev C does not work with NT V4 | ULYSSE::LEFOL | | Thu Mar 27 1997 02:48 | 6 |
| I upgraded my Hinote to NT V4. I confirm that the DEPCM Rev C does NOT
work. The Xircom PS 2 does work.
Another problem is the fact that there is no driver for the Hinote
screen (Chips 65540) in the NT distribution. The consequence is that
you cannot go above 16 colors.
|
| 1214.12 | REV A to Rev C via Blast Works | PGREEN::MURDOCHP | | Thu Mar 27 1997 08:40 | 21 |
| Hi,
I used the Blast uitlity for my DEPCM-BA Rev A to upgrade it to a REV
c and used the NT4 drivers
now it all works great.
Remember to do the upgrade of Blast using Win95 in a DOS box not
booting a Dos622 diskette then running the Blast util.
I am now seeing everything, Yes the Chips driver doesn't quite work
but 16 is better than none. I think one of the other notes
mentions a udate to the Chips problem..
Cheer Peter Murdoch
Ps Thanks to joe Kwong for the above.
|