| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 923.1 | Cateye Solar problem, too. | UMBIKE::KLASMAN | | Wed Nov 16 1988 12:33 | 8 |
| < Note 923.0 by SMURF::BINDER "And the quarterback is *toast*!" >
-< Trouble with Vetta cycle computer >-
The same thig happens to my old Cateye Solar computer. It got so bad that I
replaced with a Cateye Micro, which I like much better. I was thinking about
soldering on a small piece of wire (or just solder) to build up the contact
area since it seems that something has worn to the point that contact can be
broken.
|
| 923.2 | The Vetta moves around too easy; | AHOUSE::ACKLEY | Still the King of Nothing | Wed Nov 16 1988 15:31 | 13 |
|
I had this problem with my Vetta, but my cateye was ok. For
me the problem seems to be that the Vetta kind of slides into place
but it doesn't 'click' into place. The cateye has a notch that
seems to hold the speedometer in place better.
I found I couldn't use the Vetta on my mountain bike, since
the mount is loose enough that the speedometer falls off! I almost
lost it one time. When it slides only a little, the electrical
contact is lost, but then it's only a little ways from falling off
the bike.
Alan.
|
| 923.3 | Vetta C2 won't fall off. | SMURF::BINDER | And the quarterback is *toast*! | Wed Nov 16 1988 20:20 | 13 |
| Re: .2
> For me the problem seems to be that the Vetta kind of slides into
> place but it doesn't 'click' into place. The cateye has a notch that
> seems to hold the speedometer in place better.
I've got the Vetta C2, the model that includes cadence and elapsed time.
It does have a notch, so at least there's no risk of its falling off.
I've been thinking about ways to make the contact more positive - I
mentioned EKG gel in .0, and now I'm thinking about electronic ground
braid. Who knows...?
- Dick
|
| 923.4 | My problem was the battery | BRAT::SMITH | Never say never, I always say. | Thu Dec 08 1988 08:57 | 16 |
| re: .0
Dick,
I've experienced the very same problem. However, after some
"analysis" of the situation, I found my problem was due to
the battery! I took the unit off the bike and whacked it
around slightly, to simulate a bumpy ride, and the display
would vanish, but when I pressed on the battery cover, the
display reappeared. I haven't fixed it yet, though. I don't
have plan yet, but I might try to shim the battery with a
conductive material, to make it a tighter fit. Or maybe I'll
try some of that electrical conductive goo.
Mike
|
| 923.5 | battered batteries | AKOV75::LAVIN | | Fri Dec 09 1988 15:24 | 14 |
|
Might also be the wrong battery. Many of those suckers are
interchangeable but small differences in size will result in more
free-play with some.
You may be able to find one that fits a little tighter, even if the one
you have is suppossed to be correct. Try an electronic store with a
chart on hand that lists exact battery sizes (or try Zayres - last
time I was there they had one lying around the watch-battery area
of the store).
|
| 923.6 | C20 Instructions | MAY18::bob | For Internal Use Only | Mon Apr 03 1995 09:44 | 12 |
| I seems to have lost the instructions for my C20
(with cadence) and can't remember the magic
sequence for setting the wheel diameter.
Can anyone help?
Thanks
bob
|
| 923.7 | | NETCAD::POLK | | Tue Apr 04 1995 09:01 | 3 |
| Use right button to get to the "ODO" display. Press both buttons
and hold a few seconds till you get the flashing display. Use right
button to get to the digits. Use left button to change them.
|
| 923.8 | | MAY18::bob | For Internal Use Only | Tue Apr 04 1995 09:29 | 4 |
| Thanks
bob
|